39
3.2.3 PTZ Camera Setting
Configure PTZ camera parameters and preset position. Click
OK
to save the setting, click
Cancel
to
exit without save. When PTZ camera is set, user can control PTZ camera through PTZ control panel
on preview and playback mode (see also
Chapter 2.3.2
).
(1)
(2)
(3)
(4)
(5)
(1) Select Camera
Select the camera number that is a PTZ camera to configure.
(2) Connection Setting
-
Use PTZ:
Enable/disable the PTZ camera function.
-
Com Port:
Select the com port that is connect with DVR system.
-
Baud Rate:
Select the baud rate of com port which is connect with DVR system.
-
Protocol:
Select the protocol of PTZ camera. Please refer to your PTZ camera user’s
manual.
(3) Preset Setting
-
Preset Number:
Set a camera lens to a position that user is defined. Select the
Preset
number and using
(5) PTZ control panel
to adjust the camera lens to the wanted position.
Repeat to set reset of preset position.
-
Dwell Time:
Set a time for how long the PTZ camera stays in that position before it moves to
the next one.
-
Restore AutoPan Time:
Set a time period for restoring auto path function after the PTZ
camera has been moved. Mark the
Restore AutoPan Time
check box and select the time
period in second.
(4) Preview Screen
Display the video of selected PTZ camera.
(5) PTZ Control Panel
To control PTZ camera lens to move up, down, left, right, zoom in/out, focus in/out, and speed
up/down when setup up preset position.