30
Part II
Click
Next
to go to next setup page, click
Back
can go back previous setup page. Click
OK
to
accept the new settings, click
Cancel
to exit without saving.
(1)
(2)
(3)
(1) Storage
Display the recorded video save path. User can format the hard disk and calculate the
approximately capacity of hard disk for recording.
-
Format:
To format the hard disk.
1. Click
Refresh
to get the current storage path list.
2. Select the storage path and click
Format
button.
-
Calculate:
To calculate the capacity of hard disk for recording, click
Calculate
. And then, fill in
the hard disk capacity in
Expected HD Size (GB)
or enter the expected record days in
Expected Recording time (Days)
, and then, click
Calculate
to start calculation. To reset the
entered value, click
Clear
. The result will be shown in
Total Record Time (Days)
column. To
exit, click
OK
.
-
Overwrite Enable:
When there is not enough free space to record one hour data, the system
automatically replaces the oldest data.
-
Record Limit Days:
If you want the system to automatically erase the data after a certain days,
enable the
Record Limit
check box and enter the numbers of days in
Days
text box.
(2) Daylight
Mark
Day Light Saving
check box to enable daylight saving. And then, select the
Start
and
End
Time
by click
Setting
.
-
Time Offset:
Assign a time that it is for daylight saving time offset in your time zone. For example: