23
AVer EVC OPERATION
Connecting the camera, microphone, main system, display and power, press the power button to turn
on EVC. Power button starts blinking blue light, AVer logo shows up followed by an animation and
music. In 30 seconds camera image and home screen appear on screen. Aim the remote controller to
camera and start configuring AVer EVC.
Before You Begin
Basic Operation
Navigation buttons:
Use the
,
,
and
buttons to move the selection on the remote
controller.
Enter button:
Use the
to confirm the selection on the remote controller.
Apply:
Make the changed value to take effect. (For EVC Application)
Save:
Accept the created value and save it to the system.
Cancel:
Cancel the changed value and exit the present screen.
Home Screen
There are 2 selections divided on the Home screen:
Call
and
Setting
. Simply use the navigation
buttons to move between selections and press
to confirm the selection. You can easily place a
call and select the site contact either in
Dial, Phonebook
or
Call History
. You can easily setup up the
system in
General Setting
,
Video/Audio
, and
Network
. The administrator can set a security
password to prevent changes made to the system setting and WebTool access.
Configuration Icons
Call include Dial, Phonebook and Call History
Setting include General Setting, Video/Audio and
Network.
Menu function is divided into 2 parts
–
Call
and
Setting
.
Call function is included
Dial
,
Phonebook
and
Call History
.
Setting function is included
General Setting
,
Video/Audio
, and
Network
.
