
9
COM Settings
(continued)
Baud rate
Set the baud rate for the channel (CAM1
–CAM7) –
2400
,
4800
,
9600
,
19200
, or
38400
.
Protocol
Set the protocol for the channel (CAM1
–CAM7) –
Visca
,
SonyVisca
,
Pelco-P
,
or
Pelco-D
.
Ethernet Settings
Set up the camera
’s channel, IP address, and port on the PTZ camera controller.
The Ethernet settings menu is as shown below:
1. Channel: CAM1
2. Cam IP: 192.168.001.100
3. Port: 52381
Channel
Select the channel to setup. The channels correspond to the
“CAM1–CAM7” buttons on the PTZ
camera controller.
Cam IP
Set up the camera IP address. When a 3-digit number is entered, the cursor will automatically
move to the next column. To enter a number with less than 3 digits, press the
“RESET” button to
move to the next column. To delete an incorrect entry, press the
“PRESET” button.
[Tip]
Use the number buttons (0
–9) to enter the IP address.
Port
Set up the camera connection port.
[Tip]
Use the number buttons (0
–9) to enter the port.
Password Settings
Enable/disable and change the
PTZ camera controller’s password.
The password settings menu is as shown below:
1. Password: disable
2. Modify password
Password
Enable/disable the password function on the PTZ camera controller. The default password is
“8888.”
When the password is enabled, the user needs to enter the password to access the menu.
[Tip]
Use the number buttons (0
–9) to enter the password.
Modify password
Enter the current password, and then enter a new password. Re-enter the new password to
confirm.
[Tip]
Use the number buttons (0
–9) to enter the password.
Содержание CL01
Страница 1: ...PTZ Camera Controller User Manual ...
Страница 5: ...Password Settings 9 VISCA Command List 10 ...