
7
PTZ Camera Controller Operation
Menu
Press the
“MENU” button to enter the menu. Press the “MENU” button again to exit.
The main menu is as below shown:
1. System Settings
2. COM settings
3. Ethernet settings
4. Password settings
Using the joystick to select and set the parameters in the menu:
Right
Enter the submenu, move to the selection, or confirm the selected
value
Left
Exit current selection or return to the last selection
Up
Move between menu selections or change the value
Down
Move between menu selections or change the value
Top button
Enter or confirm the selection
System Settings
The system settings menu is as shown below:
1. Language: English
2. LED brightness: Normal
3. Backlight: Auto
4. Joystick sensitivity: 7
5. Auto standby: Off
6. IP address: 192.168.000.088:08090
7. About
[Note]
“
” and “
” indicate the menu can page down or up.
Language
The system supports
English
,
Traditional Chinese
, and
Simplified Chinese
.
LED brightness
Adjust
the PTZ camera controller’s LED panel brightness –
High
,
Low
, or
Normal
.
Backlight
Set up the backlight for the PTZ camera controller buttons
–
Auto
,
Off
, or
On
.
Содержание CL01
Страница 1: ...PTZ Camera Controller User Manual ...
Страница 5: ...Password Settings 9 VISCA Command List 10 ...