55
7.
Then check your LNB’s configurations. Please refer to
3.2.2 Scanning for Digital Satellite
Programs
for more information.
8.
Click
OK
to exit the dialog box.
9.
Select
Programs
under the
Digital TV
icon, and click
Program Scan
to obtain the
program data.
10.
Click
Apply
to save the scanning results.
4.2.3 Editing or Removing Frequencies
You can edit or delete the undesired frequencies if the data is incorrect.
1.
Select
Digital TV.
2.
Click
Edit
next to the satellite name where you want to edit frequencies. The
Satellite
Information
dialog box will appear.
3.
Then choose one of the following actions:
To edit a single
frequency
Select the desired frequency. Change its
data, such as its frequency or FEC, and
then click
Modify
.
To delete a
single frequency
Select the frequency that you want to
remove, and click the
Remove
button
located on the lower-left corner.
To delete the
whole frequency
table
Click the
Remove
button located on the
upper-right corner.
4.
Click
OK
to exit the dialog box.
4.2.4 Scanning Channels (For Advanced Users)
1.
Click
Advance
located in the lower right corner of the
Program Information
section.
Then the
Advance Program Configuration
dialog box will appear.
2.
When there are programs/frequencies missing from the program list, select
Single
Frequency
or
Range Scan.
3.
Specify the correct input port, polarization, frequency and symbol rate.
4.
Click
Scan
.
5.
After scanning, new active programs/frequencies will be memorized and listed on the left
pane of the dialog box.
6.
Click
OK
to save the scanned results.
7.
Click
Apply
to save the scanned channel.
Note: Range Scan
may take you a while. Please be patient.