AVer AVerTV 6.3 Скачать руководство пользователя страница 25

Страница: 25 / 126

3.5.4 Remote Control Buttons (Model 4) (RM-JX)

Button

Description

POWER

Turn on/off the application

SOURCE

Switch between available signal sources.

Numeric Buttons

Select a TV channel.

Under the Multi-Channel Preview mode, use

↑↓←

→

to highlight the

intended channel.

CH RTN

Go to the previously selected channel.

16-CH PREV

Preview 4 ~ 64 Channels. (By default, 16 channels will be displayed.)

VOL

▲

▼

Volume up/down.

FULL SCREEN

Display TV in full screen.

AUDIO

Switch between available audio modes.

Display or hide the

Control Panel

10.

PIP

Display or hide the PIP window.

11.

SLEEP

Go to the next file in the playlist.

Set the time to put your computer in Stand By or Hibernate mode.

Jump to the Teletext page of the corresponding color according to this

button.

12.

WAKE UP

Go to the previous file in the playlist.

Set the time to bring your computer out of Stand By or Hibernate mode.

Jump to the Teletext page of the corresponding color according to this

button.

13.

■

(Stop)

End the Playback or recording.

End the TimeShift mode and return to real-time TV or Radio mode.

14.

►

(Play)

Play the last recorded or played file.

15.

●

(Record)

Switch to PVR mode and record the current program or video into your hard

drive.

16.

TIMESHIFT /PAUSE

Freeze the playback.

Switch from real-time TV or Radio to TimeShift mode.

17.

(Forward)

Advance the playback.

Jump to the Teletext page of the corresponding color according to this

button.

18.

(Rewind)

Rewind the playback.

Jump to the Teletext page of the corresponding color according to this

button.

19.

TELETEXT

View Teletext/MHEG-5/ Closed Caption information.

20.

EPG

Launch the Electronic Program Guide.

21.

MUTE

Turn on/off the sound.

22.

▲

▼

Go up or down to the next active channel.

23.

SNAPSHOT

Capture the on-screen image to a bitmap file.

24.

DISPLAY

Display information.

Содержание AVerTV 6.3































































































































Результаты поиска

Содержание AVerTV 6.3

Отзывы:

AVer AVerTV 6.3, Руководство пользователя, Страница: 25 / 126

Результаты поиска

Содержание AVerTV 6.3

Отзывы: