Page|8
www. avenview.com
3.
INSTALLATION (HDM2-PROWALL-T4K )
GENERAL INSTRUCTIONS
1. Before you begin the software installation from the CD provided or latest CS from the website, please ensure the
HDM2-PROWALL-T4K is connected to AC power and your PC via USB or connected to the same network as the unit.
When you power off/cycle HDM2-PROWALL-T4K, please don't repower at least 5 to 10 seconds after to allow power
capacitors to discharge.
2. PC Requirements-Windows® XP/Windows Vista®/Windows® 7, compatible with Windows® 8/10
3. Ensure your Laptop or desktop is plugged in to AC power during the update process. It is not recommended to use only
battery power during the installation. Do not remove power at any time during the process as this could lead to incomplete
results.
See Section 5 Operation Method B Software control for more info.
To setup
the
Avenview
HDM2-PROWALL-T4K
please follow
the steps below to experience the best results:
Connect
the
HDMI video
s
ource to the INpuT
(HDMI IN)
-
Example Bluray or 4K Digital player or Camera
Connect
(4) four DVI/
HDMI cable
s
to
the desired
HDMI Displays
.
Please ensure all connections are seated securely and placed in the corresponding connections.
2.
3.
1.
Please ensure the connecting devices are powered off before proceeding.
4.
5.
6.
Connect the +12V 2A DC power supply to the HDM2-PROWALL-T4K.
Firstly
power on
the
HDMI Source
, after
the
boot sequence and the resolution
is sync
.
7
.
Power on the compatible HDMI displays and experience the clear images on the 1 to 4
displays
connected
in the desired mode
.