Method B: Software Operation
System Requirement and Precautions
1.
When power cycling or powering off the unit, please wait at least 5 to 10 seconds delay to allow power
capacitors to discharge. Then power on device
2.
The HDM2-PROWALL-T4K packaged software control program is compatible with Microsoft Windows 98, 2000,
XP, 7 through the interface of USB virtual com control.
3. Before double clicking on the icon of the software, make sure you have secured the connection between your
computer USB port and the DVI-PROWALL-4X.
Start the software control program
STEP 1: Click on the executable file, the following dialog box show on screen;
STEP 2: Please ensure when using Microsoft Windows 7, run as administrator;
STEP 3: Please prepare which method of control either -
USB Mode:
Use USB to connect the port on device and to the computer.
Select the correct Com port and click the OK button.
Ethernet Mode:
Enter the device IP address and click the OK button.
After the software control setting is acquired, the main control interface will pop up.
Page|1
3
www.av
enview.com
