Avenview HBT2-C6BPOC-SET, Руководство по эксплуатации продукта

Страница: 9 / 19

www.avenview.com
6
2.4
PANEL DESCRIPTION
2.4.1 INPUT PANEL ( Transmitter , HBT 2 -C 6BPOC - S ) Front
1.
LED LIGHTS :
- POWER LED: Steady BLUE LED light ON
- LINK LED: Always ON BLUE LED light indicates link is established -
SIGNAL LED: HDMI Signal detected BLUE LED Light ON
2.4.2 INPUT PANEL ( Transmitter , HBT 2 -C6BPOC-S ) Rear
2
.
POWER JACK : 12v DC Power supply
connection , please connect the supplied Latching
Screw type power.
3
.
RJ45 : Connect UTP /STP cable for
transmitting video, audio , data and POC
to the
compatible Receiver unit.
4
.
IR IN : 3.5mm IR Receiver cable for IR signal
being received. Place IR Remote within direct line
of site with the IR Receiver .
5
.
IR OUT : 3.5mm IR Blaster cable for IR signal
being transmitted. Place IR Blaster in front of the
IR window/ direct site of the device to control .
6. RS-232 : Connect to a device that has the ability
to send /receive control commands (PC or laptop
via D-Sub 9-pin male cable) TX,RX,GND (L to R)
7.
HDMI IN :
Connect HDMI source via Male to Male HDMI Cable Max 10ft- with Blu-ray player or
any HDCP Digital player .
DIP SWITCH : to activate operation Mode
ON: F/W up dat e
OFF: Normal Operating mode
8
.