Avenview HBT2-C6BPOC-SET, Руководство по эксплуатации продукта

Страница: 10 / 19

www.avenview.com
7
2.4.3 INPUT PANEL (Receiver, HBT2-C6BPOC-R) Front
2.4.4 INPUT PANEL (Receiver, HBT2-C6BPOC-R) Rear
9.
10.
POWER JACK: 12v DC
Power supply
connection, please connect the supplied Latching
Screw type power.
11.
RJ45:
Connect UTP/STP cable for
transmitting video, audio , data and POC to
the compatible Receiver unit.
12.
IR IN:
3.5mm IR Receiver cable for IR signal being
received. Place IR Remote within direct line of site
with the IR Receiver.
13.
IR OUT: 3.5mm IR Blaster cable for IR signal
being transmitted. Place IR Blaster in front of the
IR window/ direct site of the device to control.
14. RS-232:
Connect to a device that has the ability to
send/receive control commands (PC or laptop via D-
Sub 9-pin male cable) TX,RX,GND (L to R)
15.
HDMI OUT:
Connect HDMI display via Male to Male HDMI Cable Max 10ft- with HDCP
compatible display/monitor.
DIP SWITCH: to activate operation Mode
ON: F/W upadte
OFF: Normal Operating mode
16.
LED LIGHTS:
- POWER LED: Steady BLUE LED light ON
- LINK LED: Always ON BLUE LED light indicates link is established -
SIGNAL LED: HDMI Signal detected BLUE LED Light ON