1. Whenever powering off the DVI-PROWALL-9X, please stay unpowered for at least 5 to 10
seconds to allow power capacitors to discharge.
2. The DVI-PROWALL-9X provides software control program which runs under Microsoft Windows
98, 2000, XP, 7 through the interface of RS-232 serial control.
3. Before you click on the icon of the software, make sure you have secured the connection between
your computer COM port and the DVI-PROWALL-9X.
Start the software control program
When clicking on the executable file, the following dialog will pop
‐
up. It has two ways to
control the DVI
‐
PROWALL
‐
9X device (under Microsoft Windows 7, please run as administrator).
RS
‐
232 serial Mode: Use RS
‐
232 to connect the port on device and computer. Select correct COM port
and click the
button.
Ethernet Mode: Enter the device IP address and click the
button.
After the software control setting is accomplished, it will enter directly to control interface.
Page|
1
2
www.av
enview.com
System Requirement and Precautions
SOFTWARE OPERATION
5.
