The EDID learning function is only necessary when you encounter any display on the HDMI output port that
cannot play audio and video properly. Because the HDMI sources and displays may have various level of capability
in playing audio and video, the general principle is that the source will output the lowest standards in terms of
audio format and video resolutions to be commonly acceptable among all HDMI displays. In this case, a 720p
stereo HDMI signal output would probably
be
the safest choice. Nevertheless, the user can force the matrix to
learn the EDID of the lowest capable HDMI display among others to make sure all displays are capable to play the
HDMI signals normally.
There is a method to do EDID Learning as below
S
oftware Control: Please refer to the
Operation Approach
/
Software Control through RS232 port (Page 12~13.)
There are four embedded default EDIDs as below
:
1. Full-HD(1080p@60)-24bit 2D | 2ch
2. Full-HD(1080i@60)(720p@60)-24bit 2D & 2ch
3. Full-HD(1080p@60)-30bit 2D | 2ch
4. 4K2K@30-24bit 2D & 2ch
6
.
EDID LEARNING
Page|
2
2
www.av
enview.com
