Aventura VID-ALARM-8CH-COM, Справочное руководство

Страница: 6 / 7

VID ‐ ALARM ‐ 8CH ‐ COM
Reference Manual 6
PROTOCOL
Control code, which send out from DVR Command format: 9600,N, 8,1
NO.
Function Data1 Data2 Data3 Data4 Data5 Data6
Note
Format Start bit ID Command Parameter1 Parameter 2 Check sum
1
Alarm
state
enquiry
E0 00 ‐ 0F 3F 00 00
2
Relay
state
enquiry
E0 00 ‐ 0F 3B 00 00
3
Output
ON/OFF
E0 00 ‐ 0F 3D B0 ‐ B7 B8 ‐ B15
Bits (0 ‐ 15) is the
relay control bits of
1 ‐ 16 channel, 1=ON,
0=OFF
Data send back
No. Function Data1 Data2 Data3 Data4 Data5 Note
1 Alarm state
send back
F0 00 ‐ 0F D0 A0 ‐ A7 A8 ‐ A15 A (0 ‐ 15) is corresponding to alarm
inputs 1 ‐ 16,1=alarm, 0=dis ‐ alarm
2 Relay state
send back
F0 00 ‐ 0F D2 A0 ‐ A7 A8 ‐ A15 A (0 ‐ 15) is corresponding to outputs
1 ‐ 16,1=ON, 0=OFF
Note:
1.The data4&data5 of this alarm box is 0
NOTES:
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________