Safety instructions
8
AVENTICS
| Marex 3D | R417003106–BDL–001–AA
created in the application which may cause damage to persons
and/or property. Therefore only apply a product within
applications relevant to safety if this kind of use is clearly
specified and permitted in the product's documentation as for
example within explosive areas or in parts of a control system
which are relevant for functional safety.
Unintended use of the product does also include:
W
connecting the 3D Controller to unsuitable supply voltage
(see chapter 11, Technical data)
W
combining the 3D Controller with further components which
are not suitable for that purpose,
W
exposing the 3D Controller to ambient conditions which are
not admissible (see chapter 11, Technical data).
AVENTICS declines any responsibility for damage resulting
from unintended use. The user of the equipment is fully
responsible for any risk arising from unintended use of the
product.
2.4
Personnel qualifications
The activities described in these assembly instructions require
basic knowledge of mechanics and electrics as well as
knowledge of the corresponding terminology. To ensure the
safe use of the product, those activities may only be performed
by authorized personnel or by instructed persons supervised by
authorized personnel.
An authorized person is someone who due to his/her expert
training, knowledge and experience including his/her
knowledge of the relevant regulations can assess the assigned
tasks, recognize possible dangers and take appropriate safety
measures. Authorized personnel must comply with the
applicable specialist regulations.
2.5
General safety instructions
W
Observe the valid regulations pertaining to accident
prevention and environmental protection.
