Aventics Marex 3D, Руководство по сборке, Страница: 15 / 24

Assembly
AVENTICS | Marex 3D | R417003106–BDL–001–AA 15
Eng
lish
7 Assembly
7.1 Installation conditions
O
Choose an installation site which meets the characteristics
of protection class IP 54.
O
Provide enough space for the connection of plugs and cables
including the cable glands which must be used when routing
the cables through the openings in the housing.
7.2 Mounting orientation
The 3D Controller can be mounted in any position. If mounted to
a wall or into a cabinet, the connections should point
downwards.
7.3 Mounting the 3D Controller
The housing of the 3D Controller provides 4 bores for mounting
bolts type M8. Those are not included in the scrope of supply.
1. Select a bolted connection which suits the material and
thickness of your mounting surface.
CAUTION
Risk of injury and property damage due to improper
installation or mounting work
Improper installation work can cause accidents or damage to
property.
O
The 3D Controller may only be installed by AVENTICS or
qualified personnel as specified in chapter 2.4.
O
Install or uninstall the 3D Controller only if the
component and the system are powered off.
O
Prepare mounting work carefully.
O
Make sure there is enough space to mount the product
professionally.