Transport and storage
14
AVENTICS
| Marex 3D | R417003106–BDL–001–AA
6.2
Delivery check
O
Check the supply immediately on receipt for completeness
and transport damage.
O
Proceed as follows if any visible damage is discovered
during receipt of delivery:
– Do not accept the delivery or only under reservation.
– Note the extent of damage on the transportation
documents or the delivery note.
– Submit a claim.
6.3
Product storage
O
Do not destroy the packaging and only remove it shortly
before installation.
O
Adhere to the following conditions for storage:
– Only store the 3D Controller in its original packaging.
– Do not store the 3D Controller outside.
– Store the packages in a dry and dust-free place.
– Do not expose the packages to aggressive media.
– Protect the packages against solar radiation.
– Observe the admissible storage temperature of
248 to 358K (-25
°
C to +85
°
C), see also chapter 11,
Technical data.
O
Avoid mechanical impact.
O
Make sure all M12 protective caps are applied.
Maximum storage period
The 3D Controller may be stored for 2 years at maximum. The
storage period will be prolonged if the 3D Controller is
connected to the power supply from time to time.