avenli FP13-21-CZ, Руководство пользователя

Страница: 11 / 60

11
Cleaning and replacement
1. Disconnect the power cable of the 230 V adapter from the power socket.
2. Loosen the nut of the filter chamber cover (P3) by turning it counterclockwise.
Place in a safe place.
3. Clean the used filter cartridge (P6) or replace if necessary.
4. Check the inside of the filter chamber (P7).
5. If there is dirt or sediment in the bottom of the cabinet, rinse it out with a bucket of
water or a garden hose.
6. Put the filter chamber cover nut (P3) in place and tighten clockwise on the filter
housing.
7. Connect the power cord to the adapter.
Troubleshooting
THE PUMP IS NOT WORKING:
A. Check for blown fuses, disconnected circuit breakers or interrupted wiring.
B. Check the engine. If the engine is overheating or overloaded, switch it off. Allow
the engine to cool down.
C. Consult an expert.