Avenger FDT10BF Скачать руководство пользователя страница 1

VENT-FREE GAS WALL 

HEATER

OWNER’S OPERATION AND 

INSTALLATION MANUAL

BLUE FLAME MODELS

FDT10BF, FDT20BF & FDT30BF

 

WARNING: If the information in this manual is not 

followed exactly, a fire or explosion may result causing 

property damage, personal injury or loss of life.
—  Do not store or use gasoline or other  flammable va-

pors and liquids in the  vicinity of this or any other 

appliance.

—  WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.

•  Do not touch any electrical switch; do not use any 

phone in your building.

•  Immediately call your gas supplier from a neighbor’s 

phone. Follow the gas supplier’s instructions.

•  If you cannot reach your gas supplier, call the fire 

department.

—  Installation and service must be performed by a quali-

fied installer, service agency or the gas supplier.

 

WARNING: This appliance is equipped for Natural and 

Propane gas. Field conversion is not permitted other than 

between natural or propane gases.

FDT30BF 

Shown

Questions, problems, missing parts? 

Before returning to your retailer, call 

our customer service department at 1-855-607-6557, 8:00 am - 4:30 pm EST, 

Monday through Friday or email

 [email protected]

Содержание FDT10BF

































Отзывы: