- 9 -
GB
AF980 Keypad for hardwired systems
INTRODUCTION
Hardwired keypad AF980 (Fig.1) allows not only connection, disconnection and partial
setting of an anti-intrusion system but it also allows to send an “emergency” alarm
directly from the keypad.
It reports the system status and any failures of the system. It can be combined with
activation points AF45342. It is compatible with the Ave hardwired systems, that is
with control units AF53904, AF53907, AF994, AF997.
NOTE:
keypad AF980 can also control serial decoder 45378DF to control electrolocks
or to enable burglar-alarm control units with standard input.
TECHNICAL DATA
• Power supply: 12 Vdc/ac ± 10%
• Max. current consumption at 12Vdc:
- 4 mA in ON mode
- 10 mA in stand-by
• Tamper protection against opening and removal through a NC contact
• Emergency alarm output (changeover potential-free contact) to be enabled directly
from the keypad
• 4-figure user code
• Possibility of inserting up to 7 user codes
• Built-in buzzer to confirm operations
• Max. installation distance from the alarm control unit: 200 m
• Operating functions:
- system connection
- system disconnection
- system partial setting
- tamper alarm
- emergency alarm
• Installation: wall or flush-mounting (AVE maxi-module)
• Material: RAL9016 white ABS
• Protection degree: IP40
• Dimensions: (125x102,5x30) mm
Standard compliance
• EN 50081-1, EN50131-1, EN50130-4, EN61000-4
CEI 79-2, performance level assured: 1
C421 14-10-2005 14:50 Pagina 9
