Seat Adjustments
page 19
Backrest Adjustment
Seat Height Adjustment
Lap belt Adjustment
To adjust the backrest pull the
lever upwards and gently lay
backward to suit. Release the
handle and the backrest will lock.
Important: Keep the backrest as
upright as is comfortable. This
stabilises the scooter. Only
make these adjustments when
the scooter is on flat and level
ground
To adjust the seat height, remove
the seat and rear cover. Release
the bolt with 2 x 17mm spanners.
Remove the bolt and raise or lower
the seat to suit. Replace the bolt in
the desired hole and tighten.
Important: It is recommended
that a service engineer carry out
adjustments.
A lap belt is supplied for your
safety. This is a standard seat belt
type and is adjusted for width by
loosening/tightening the right hand
clasp to suit. When comfortable,
push the clasp and lock together.
To release push the red button in
the lock marked “Press”. This will
release the belt.
“We recommend you wear the
seat belt at all times”