Avaya S8100 Series, Пособия для модернизации, Страница: 21 / 26

Replacing an S8100 Media Server to upgrade its software from R9.5
Upgrade steps
Upgrade Job Aids for S8100 21
November 2003
Upgrade steps
Step Details
1 For a direct connection between the
technician’s laptop and the S8100’s service
port:
LT
– Change laptop’s IP address to
192.11.13.5
a Right-click the 'Network Neighborhood' {My
Network Places} icon on the laptop’s desktop and
select Properties.
b {Right-click ‘PCMIA Ethernet Connection’ (or Local
Area Connection) and select Properties.}
c Highlight the TCP/IP icon from the popup window
and select Properties. Check the ‘Specify an IP
address’ {‘Use the following IP address’} radio
button.
d Enter
192.11.13.5
in the IP address field and
255.255.255.252
in the subnet mask field, and click
OK to close the popup windows.
2
LT-IE
– Disable proxy servers on Internet
Explorer.
a Open Internet Explorer and select Tools, Internet
Options, the Connections tab, and LAN Settings.
b Uncheck the ‘Use a proxy server’ radio button, and
click OK to close the popup windows.
3 Connect the laptop to the R9.5 Processor
board (TN795). a Connect a cable from the laptop’s PCMCIA Ethernet
card to an RJ45 coupler.
b Connect a cross-over (flip) cable from the coupler to
the PCMCIA network-interface card in the TN795’s
PCMCIA slot.
4
LT
– Connect to the TN795 processor. a Click Start, Run, and enter
telnet 192.11.13.6
.
b Log in using lucent3 . – The LAC prompt displays.
5 LAC – Open a bash shell by typing bash at
the LAC prompt.
Type bash at the LAC prompt.
6 BS – Important! – Display and record the
customer’s network and product
information.
a From the bash shell, execute the following three
commands –
setip , productid , oss .
b
Write down all of this information exactly as it
appears on the screen.
You will need to re-enter
this information later.
7
BS
– Shutdown AUDIX. Type
shutdown audix
. When the BASH prompt returns
(the Audix shutdown takes a few minutes), type
statapp
to
verify that AUDIX has shutdown.
8
BS
– Exit the bash shell and return to the
LAC prompt.
Type
exit
.
9
LAC
– Open a SAT window. Type definity to open a SAT window. (The terminal type is
‘NTT’ {‘W2KTT’}.)