Using a CD to upgrade an S8100’s software from R10 or later
Upgrade steps
12
Upgrade Job Aids for S8100
November 2003
50
SAT
– Verify that no major or minor alarms
are present.
Type
display alarms
.
51
SAT
– Verify outgoing alarm reports link to
INADS.
Type
test inads-link
.
52
SAT
– Save translations.
Type
save trans
.
53
SAT
– Log out of SAT, and exit LAC.
a
Type
logoff
, and respond with
y
to close the SAT
session.
b
Type
bash
to go to the bash shell.
54
BS
– Verify Intuity alarms.
Type
logsend -tTST
.
55
BS
– Verify GAM alarms.
Type
wrntevent GAM 0 9991
.
Note: This causes a Major GAM alarm. After the system
has called out, enter
cleargamalarm all
at the
BASH
prompt
to retire the alarm. This alarm also generates a
Maestro case that the INADS group will need to close.
56
BS
– Close the bash windows.
a
Type
exit
to close the bash window.
b
Type
exit
to close the LAC window.
57
LT-IE
– Backup the translations and other
data to the PCMCIA card or to a network
location.
a
Click 'Administer System'.
b
Click ‘Backup & Restore’ under System
Maintenance.
c
Click ‘Immediate Backup’.
d
Under “Choose Items for Immediate Backup,”
select everything that is installed.
e
Set Destination to PCMCIA, or click ‘Other
Location’ to backup to a network location.
f
Click the Backup button.
Note: If the medium you are backing up to runs out of
space, a message will appear noting the files that didn’t get
backed up.
58
Close Internet Explorer on the S8100’s
desktop and on the laptop.
SECURITY ALERT:
!
When you are finished with the upgrade procedures, you should restore your laptop to its original
configuration, including unsharing the CD drive. When connected to a network, a shared drive is a
potential security risk.
Step
Details