Resetting and Power Cycling the IP Telephone
Issue 4 November 2006
79
Resetting and Power Cycling the IP Telephone
Reset your IP telephone when other troubleshooting suggestions do not correct the problem or
after being advised to do so by your System Administrator.
!
CAUTION:
CAUTION:
Use a Power Cycle only with the approval of your System Administrator and only
when a reset does not resolve the problem. Power cycling may cause stored
information such as options and settings to be lost.
Resetting Your Phone
This basic reset procedure should resolve most problems.
1. Press the
Mute
button.
2. Using the dial pad, press the following keys in sequence:
7 3 7 3 8 #
The display shows the message “Reset values? * = no # = yes.”
WEB ACCESS APPLICATION:
Pressing the
Web
softkey does not
display a Web site.
Check with your LAN Administrator to determine if the
Web server is not operating, if there are network
connectivity problems, or other network problems.
Dialing from this application does
not go through.
Your administrator must administer settings for the
Enhanced Dialing feature beyond the defaults.
You cannot add an entry to the
Speed Dial list.
You have 48 Speed Dial entries, the maximum allowed.
You must delete at least one entry before adding a new
entry.
OPTIONS:
No Options other than “View IP
Settings” display.
Your administrator has turned off all user-settable
options.
Problem/Symptom
Suggested Resolution (continued)
2 of 2
Содержание one-X 4610SW
