DHCP Server Administration
Issue 1 June 2007
43
Creating a DHCP Scope for the IP Telephones
Use the following procedure to create a DHCP scope for the IP telephones.
1. Select
Start
-->
Programs
-->
Admin Tools
-->
DHCP Manager
.
2. Expand
Local Machine
in the DHCP Servers window by double clicking it until the
+
sign
changes to a
-
sign.
3. Select
Scope
-->
Create
.
4. Using information recorded in
Table 3: Required Network Information Before Installation -
Per DHCP Server
:
Define the
Telephone IP Address Range
.
Set the
Subnet Mask
.
To
exclude
any IP addresses you do not want assigned to IP telephones within the
Start
and
End
addresses range:
a. In the
Exclusion Range Start Address
field, enter the
first IP Address
in the range that
you want to exclude.
b. In the
Exclusion Range End Address
field, enter the
last IP Address
in the range that
you want to exclude.
c. Click the
Add
button.
d. Repeat steps a. through c. for each IP address range to be excluded.
Note:
Note:
Avaya recommends that you provision the 1600 Series IP Telephones with
sequential IP addresses. Also do not mix 1600 Series IP Telephones and PCs in
the same scope.
5. Under
Lease Duration
, select the
Limited To
option and set the
lease duration
to the
maximum.
6. Enter a
sensible name
for the
Name
field, such as “DEFINITY IP Telephones.”
7. Click
OK
.
A dialog box prompts you:
Activate the new scope now?
8. Click
No
.
Note:
Note:
Activate the scope only after setting all options.
