Avaya Media Gateway G350, Руководство по установке

Страница: 34 / 60

Preparing for configuration
Step 1: Prepare configuration equipment
34 Installation of the G350 Media Gateway
December 2003
Preparing a G350 without an S8300 for
configuration
If some of the configuration will be done on-site and some remotely, the supporting technician will
perform the local configuration and set up the G350 for the remote configuration. You will need to assist
the technician (see
Assisting a combined remote and on-site configuration on page 40).
If all the configuration will be done remotely (see Step 2: Assist the configuration on page 40), you need
to enable a modem on the CON port of the G350 and connect the modem, as follows:
1
Prepare a PC with a CD-ROM drive and a TFTP server on the network. This may be needed for
installing software and firmware upgrades.
NOTE:
When uploading firmware from the S8300 using TFTP, you may need to enable TFTP
service in the Set LAN Security parameters of your web server.
NOTE:
Firmware upgrades for the G350 and media modules can either be installed from CD or
downloaded from the Web.
2
Download GIW (Gateway Installation Wizard) from the Avaya website
(support.avaya.com/avayaiw) to the laptop computer. The laptop should be running Windows
2000 or Windows XP to support GIW.
3
Plug one end of the provided flat RJ-45 to RJ-45 cable into the provided DB-9 adapter.
4
Plug the RJ-45 connector at the other end of the cable into the CON port of the G350.
5
Plug the DB-9 end of the flat cable into the COM port of the laptop computer.
6
From your laptop computer, double-click the GIW icon to run GIW. The opening screen appears: