AVAYA Merlin Legend
9
The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1
6.
DTMF On Time (ms)
= 80
7.
Search Entire String for Reason Code
= Leave blank
8.
Location of Inband reason code
= 1
9.
Log Inband Packets
= Leave blank
10.
Fixed Length Packets
= Leave blank
11.
Filler Character
= <None>
12.
Delimiter Character
= #
13.
Right Alignment of Digits in a Field
= Leave blank
14.
Request String Supported
= Leave blank
Access
the
Protocol Settin
gs button within the same tab
1.
Call Packet Type
= Direct Call
2.
Codes for Call Type:
Code 1
= 00
3.
Field Type Settings:
- Called
Id
= Leave blank
- Calling
Id
= 2 (Under the Sequence Number column)
-
Trunk Id
= Leave blank
4. Next
select
Call Packet Type
= Divert:
5.
Codes for Call Type:
Code 1
= 02 (Internal call routing for All Call)
Code 2
= 03 (External call routing for All Call)
6.
Field Type Settings
:
Called Id
= 3 (Within the Sequence Number column)
Calling Id
= 2 (Within the Sequence Number column)
Trunk Id
= Leave blank
7.
Select
OK
to save changes
Within
the
Inband
tab, access the
MWI Settings
button
1.
Port Group Name
= Select the port group to be used for MWI
2.
Max. MWI Sessions
= Enter the maximum number of MWI sessions
allowed at one time. The Default value is 1
3.
Indicator On/Off signals must use same port
= Click to turn on
4.
Indicator On
:
Prefix
= #53
Suffix
= Leave blank
5.
Indicator Off
:
Prefix
= #*55
Suffix
= Leave blank
6. Select
OK
to save changes
Note:
The numeric values of #53 and #*53 for MWI on/off shown above are
examples. Confirm what the MWI Feature Access Codes for these
specific settings are on your PBX. The settings in the PBX for MWI
on/off must match those for MWI on/off in the MM.
After making these changes, return to “Configuring the voicemail system” within
the Message Application Server Installation Guide. Ensure you are prompted to
restart the Message Application Server services to apply these changes.
