Avaya M-ACCF Скачать руководство пользователя страница 73

Страница: 73 / 114

Chapter 4

X-Switch CLI & ATM Terminal Interface

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide

Assigning the M-ACC module IP address, Gateway and Netmask:

Select Option 1 “Set IP Configuration”

Check that the LED labelled OPR, on the ATM access module front panel is ON.

Type the IP address, net mask and default gateway of the ATM access module
when prompted.

Note:

The default Gateway must be on the same Subnet as the IP address assigned

in step 2 (above) for the ATM access module.

There is no need to perform a reset.
Configuration Example:

Enter IP Address (149.49.54.249): 149.49.44.80

Enter Netmask (255.255.255.0): 255.255.255.0

Enter Default Gateway (149.49.54.1): 149.49.44.120

Note:

If there are any errors, the new configuration settings are not saved. To save

the new configuration settings, you must correct the errors by repeating the
command.

Содержание M-ACCF



















































































































Результаты поиска

Содержание M-ACCF

Отзывы:

Avaya M-ACCF, Руководство пользователя, Страница: 73 / 114

Результаты поиска

Содержание M-ACCF

Отзывы: