Avaya M-ACCF Скачать руководство пользователя страница 51

Страница: 51 / 114

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide

Chapter 3

Installation

Installing the M-ACC Module

Safety Information

Warning:

Before installing or removing any components of a device, or carrying out

any maintenance work, you must read the safety information provided in

Appendix

A, Important Safety Information. Disconnect the device from the main power
supply.

Warning:

Installation and removal of the ATM access module must be carried out by

qualified personnel only. Before installing the module into a unit, you must first
disconnect the unit from the mains power supply.

Caution:

Only hold the ATM module by the edges to avoid damage from static. Do

not touch the top or bottom of the circuit board. If possible, wear a wrist-strap and
use an anti-static bag.

The multimode Avaya M-ACCF ATM access module is a Class 1 LED product. The
single-mode M-ACCSF module is a Class 1 Laser product. They comply with EN
60825-1 and Food and Drug Administration (FDA) 21 CFR 1040.10 and 1040.11.

The modules must be operated under recommended operating conditions.

Содержание M-ACCF



















































































































Результаты поиска

Содержание M-ACCF

Отзывы:

Avaya M-ACCF, Руководство пользователя, Страница: 51 / 114

Результаты поиска

Содержание M-ACCF

Отзывы: