manualshive.com logo in svg

Avaya INDeX CSLC, Руководство по установке, Страница: 24 / 28

Поделиться
Скачать
Avaya INDeX CSLC Скачать руководство пользователя страница 24

Page 24 - Repeater Base Stations 

The Repeater Setup Program 

Attaching a Directional Aerial 

The directional aerial is supplied with a wall mounting plate, screws and wall fixings. 

It also includes a 0.9m lead (fixed length) for connection to the directional aerial 

socket on the back of the Repeater. 
The face of the aerial should be mounted perpendicular to the parent DBS. The 

DECT system should be installed and the position of the Repeater plus directional 

aerial tested by making calls before finally fixing the wall mounting plate into place. 

The directional aerial then clicks into the wall mounting plate. 

 

The Repeater Setup Program 

Before a Repeater can be used, it must be set-up with various settings; e.g. the 

base station number, system number, etc. The Repeater Setup program runs on a 

Windows based PC and require the serial lead and phone doubler from a DECT 

Repeater Programming kit 

Installing the Repeater Setup Program 

The Repeater Setup program is supplied on floppy disks as a self-installing program 

(must be V3b). It is also available from the web site 

(

https://emea-businesspartner.avaya.com/index.asp

) as a self-extracting file 

Windows 3.x

 

1.  Insert the first disk 

2.  In program Manager, select 

File

 and then 

Run

 

3. Type 

a:\setup.exe

 and then click on 

OK

 

4.  Follow the on-screen instructions for installing Admin program 

 

Windows 95/NT

 

1.  Insert the first floppy disk 

2. Click on 

Start

. Select 

Settings

 and then 

Control Panel

 

3. Select 

Add/Remove Programs

 

4. In the 

Add/Remove Programs Properties

 menu click on the

 Install/Uninstall

 

tab. Click on the 

Install

 button 

5.  Windows will scan the floppy disk for a suitable installation file 

6.  When it has located the file

 

setup.exe

 on the floppy disk, click on 

Finish

 

7.  Follow the on-screen instructions for installing Admin program 

 

Connecting a Repeater for Programming 

The Repeater Setup kit includes an adaptor and a programming lead. 

 

The programming lead incorporates special components. 

  Do not use any other serial lead 

1.  Use the doubler to connect the serial lead to the Repeater in parallel with the 

power supply connector. Ensure that the power supply is on 

2.  Connect the serial lead to the PC on which the Repeater Setup program is 

installed 

 

Page 24 

Installation Manual 

38DHB0002UKCA – Issue 8 (26/03/2002) 

INDeX CSLC 

Содержание INDeX CSLC





























Отзывы:

Нет отзывов