Avaya INDeX CSLC, Руководство по установке, Страница: 11 / 28

Using the Site Survey Kit Page 11
Subscribing to the Survey Base Station
Up to eight handsets can be subscribed to the Survey Base Station. All these
handset can display the RSSI signal quality simultaneously but only one can receive
the audio input at any time. Normally only one handset is subscribed to the Survey
Base Station
1. Connect the Survey Base Station connected to it's power supply and switch on
2. Turn the handset on and use the following step to assign it a number between 1
and 8. Dial *99972* x where x is the number between 1 and 8. Then press
✓
3. Press MENU and the > key until LOGIN appears and then press
✓
. SELECT
LOGIN appears.
4. Press the > key until required SYSTEM number (1-4) appears then press
✓
5. Press > until SUBSCRIPTION REMOVE appears, then press
✓
6. Enter the password (default 0000) and press
✓
to display SUBSCRIPTION
REMOVE? Press
✓
to display any previously entered System ID (appears
below SYSTEM X where X = 1 to 4). Remove previously subscribed ID by
pressing
✓
7. You are returned to SUBSCRIPTION CREATE. Press
✓
to begin subscription.
8. The handset is now searching for a system to which it can subscribe. Press and
hold the subscribe button on the Survey Base Station for three seconds. The
Survey Base Station will then stay in subscribe mode for one minute
9. Use the < and > buttons to display the ID numbers of available DECT systems
found by the handset. Look for the ID number of the Survey Base Station
(printed on the back of the Survey Base Station) and then press
✓
10. Use the < and > to select which system you want the Survey Base Station
assigned as and then, at the AC: prompt, enter 1234 and press
✓
11. SUBSCRIPTION WAIT appears. When successfully subscribed, the handset
bleeps. Should SUBSCRIPTION FAILED appear, repeat from step 5 removing
any previously subscribed ID for the SYSTEM number you are attempting to
subscribe too.
Installation Manual Page 11
INDeX CSLC 38DHB0002UKCA – Issue 8 (26/03/2002)