Avaya G450 Manager, Справочное руководство CLI

Страница: 421 / 1334

Frame relay encapsulation
Issue 1 January 2008 421
Related Commands
clear frame-relay counters , interface serial , encapsulation , frame-relay class-dlci , frame-relay
interface-dlci , frame-relay lmi-n391dte , frame-relay lmi-n393dte , frame-relay lmi-type ,
frame-relay priority-dlci-group , frame-relay traffic-shaping , ip address , map-class frame-relay ,
bc out , be out , cir out , fragment , show frame-relay map , show frame-relay pvc brief , show
interfaces , show traffic-shape , GRE tunneling , show traffic-shape-statistics
frame-relay lmi-n393dte
Use the
frame-relay lmi-n393dte
command to set the number of status polling intervals
over which the error threshold is counted (the monitored event count). To set the error
threshold, refer to
frame-relay lmi-n392dte on page 420. In other words, if within
events
number of events the station receives
error_threshold
number of errors, the interface is
marked as down.
Use the
no
form of this command to revert to the default value.
Syntax
[no] frame-relay lmi-n393dte events
Parameters
User Level
read-write
Context
interface:Serial (DS1 FR L2, USP FR L2)
Example
To set the number of events over which the error threshold is calculated to 5:
G450-001(if:Serial 3/1:1)# frame-relay lmi-n393dte 5
Parameter Description Possible
Values Default
Value
events
The number of events 1-10 4