Avaya G450 Manager, Справочное руководство CLI

Страница: 131 / 1334

Issue 1 January 2008 131
set digits
Define the inserted dial string that
is added to the beginning of the
received DID incoming dial string
for analog DID trunks or for DS1
TIE trunks using in-band
signaling in SLS
set digit-treatment
Define the incoming digit
treatment for analog DID trunks
or for DS1 TIE trunks using
in-band signaling in SLS
set
incoming-destination
Identify an extension to directly
receive an incoming trunk call in
SLS
set
incoming-dialtone
Provide a dial tone in response to
far-end trunk group seizures in
SLS
set japan-disconnect
Perform a disconnect sequence
(CONNECT message followed by
a DISCONNECT message) in
SLS
set name
Identify the user name for a trunk
group in SLS
set numbering-format
Specify the numbering plan for
this trunk in SLS
set send-name
Define whether or not the calling,
connected, called, or busy party’s
administered name is sent to the
network on outgoing or incoming
calls in SLS
set send-number
Define whether or not the calling,
connected, called, or busy party’s
administered number is sent to
the network on outgoing or
incoming calls in SLS
set supervision
Define the incoming signaling
supervision mode for analog DID
trunks or DS1 tie trunks only in
SLS
Table 85: SLS survivability CLI commands (continued)
Root Level
Commands First level command Second level command Description
10 of 11