Avaya G450 Manager, Справочное руководство CLI

Страница: 1049 / 1334

SLS survivability
Issue 1 January 2008 1049
set digits
Use the
set digits
command to define the inserted dial string that is added to the beginning
of the received DID incoming dial string for analog DID trunks or for DS1 TIE trunks using
in-band signaling in SLS.
Note:
Note:
You must have executed the set digit-treatment command before this command
will work.
Syntax
set digits digits
Parameters
User Level
read-write
Context
sls > trunk-group
Example
To define the inserted dial string as 538:
G450-001 (sls-trunk-group-<tgnum>)# set digits 538
Related Commands
add port , clear tac , clear trunk-group , remove port , set cbc , set cbc-parameter , set
cbc-service-feature , set channel-preference , set codeset-display , set codeset-national , set dial ,
set digit-handling , set digit-treatment , set incoming-destination , set incoming-dialtone , set
japan-disconnect , set name , set numbering-format , set send-name , set send-number , set
supervision , set tac , set trunk-hunt , set sls , show (trunk-group) , show sls , show trunk-group sls ,
trunk-group
Parameter Description Possible
Values
*
* The number of digits must agree with the
digit-treat
parameter in the set digit-treatment command. If
the
digit-treat
parameter is insert3 , then the
digits
parameter for this command must be three
digits in length.
Default
Value
digits
The inserted dial string that is added to the
start of the received DID incoming dial string 0-9 plus * and #