Avaya G450 Manager, Справочное руководство CLI

Страница: 1052 / 1334

CLI Commands SLS survivability
1052 Avaya G450 CLI Reference
set incoming-dialtone
Use the
set incoming-dialtone
command to provide a dial tone in response to far-end
trunk group seizures in SLS.
Note:
Note:
This command only applies to digital DS1 trunks set up for inband signaling.
Syntax
set incoming-dialtone {
yes | no}
User Level
read-write
Context
sls > trunk-group
Example
To withhold a dial tone:
G450-001 (sls-trunk-group-<tgnum>)# set incoming-dialtone no
Related Commands
add port , clear tac , clear trunk-group , remove port , set cbc , set cbc-parameter , set
cbc-service-feature , set channel-preference , set codeset-display , set codeset-national , set dial ,
set digits , set digit-handling , set digit-treatment , set incoming-destination , set japan-disconnect ,
set name , set numbering-format , set send-name , set send-number , set supervision , set tac , set
trunk-hunt , set sls , show (trunk-group) , show sls , show trunk-group sls , trunk-group
Parameter Description Possible
Values Default
Value
yes
A keyword indicating to provide a dial tone
no
A keyword indicating trunks that are not
sending digits, for example, an incoming
call on a loop-start central office trunk.
This is the default value.