Avaya ERS 2500, Руководство по устранению неисправностей

Страница: 86 / 90

1. Enter the
show eapol port <port#>
command to display the information.
2. Ensure that global EAP is enabled and that the port status is eap-auto.
Setting global EAP enabled and port at eap-auto
Make the required changes to ensure that EAP is enabled globally and that the port status is
set to auto.
1. Use the
eapol enable
command to enable EAP globally.
2. Use the
eapol status auto
command to change port status to auto.
Showing EAPOL multihost
Review the EAPOL multihost information.
1. Enter the
show eapol port multihost
command to display the information.
2. Note the following:
Use RADIUS To Authenticate NonEAPOL Clients is enabled
Formatting non-EAPOL RADIUS password attribute
Make the required changes on the RADIUS server to the password format.
Use vendor documentation to make required changes on RADIUS server to change the format
to
IpAddr.MACAddr.PortNumber
.
Enabling RADIUS to authenticate non-EAPOL clients
Make the required changes on the RADIUS server to authenticate non-EAP clients.
Apply changes to RADIUS server using vendor documentation.
Troubleshooting authentication
86 Troubleshooting November 2010