AVAYA DEFINITY G3 / ProLogicx
Confidential
6
•
Assign PBX Extensions to Channels
Select “Voice System Administration” menu
Select “Voice Equipment” menu
Select “Actions “ button
From the “Assign. Change” screen,
Select “PBX Extension to Channel” option
Assign the extension numbers computed in the above step to all
used voice channels.
•
Assign Service to Channels
Select “Voice System Administration” menu
Select “Voice Equipment” menu
Select “Actions “ button. This will bring up the “Actions Menu”
From the “Assign. Change” screen,
Select “Services to Channels” option
Assign DNIS as service to all channels.
•
Assign Number Services to Channels
Select “Voice System Administration” menu
Select “Number Services” menu
Select “Assign/Change” option
Administer parameters as follows:
Called Numbers : any
Calling
Numbers:
any
service Name: AUDIX
•
Assignment of Channel to Groups
Select “Voice System Administration” menu
Select “Voice Equipment” menu
Select “ACTIONS” button, this will bring up the Actions menu.
Select “Assign/Change” option
From the Assign/Change screen, select “Channels to Groups”
option.
NOTE:
By default all channels are assigned to group 2. The
dedicated MWI channel
must
be assigned to a
different group
to
ensure that the same channel that turns on MWI lamp turns off the
lamp. This is a switch limitation. Dedicated MWI channels that are
assigned to a different group must also be “unassigned” from group
2. If more than one dedicated MWI channel, each channel should be
in a different group. By convention the highest channels are used as
dedicated MWI channels.
•
Transfer
Security
Assignment
Select “Voice System Administration” menu
Select “Transfer Security” menu
Assign restrictions if any used.
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1