14
Configuring the Avaya CallPilot® Mini
P1002915 01.1
4
Click the
Install
button.
5
Reboot the Avaya CallPilot® Mini.
You can now start programming the CallPilot parameters. For information about how to program
CallPilot, refer to the
Avaya
CallPilot® Manager Set Up and Operation Guide
.
Configuring the Avaya CallPilot® Mini
After you have initialized the Avaya CallPilot® Mini, you can begin configuring the CallPilot
features. For information about how to configure the Avaya CallPilot® Mini, refer to the
Avaya
CallPilot® Manager Set Up and Operation Guide
.
Additional information
For more information about installing the Avaya CallPilot® Mini (such as troubleshooting), refer
to the
Avaya
CallPilot® Mini Installation and Maintenance Guide
.
Companding Type
Select the companding law that is used by your Meridian 1 switch and the public switched
telephone network.
You can select A-Law or M-Law.
Mailbox Keycode
If you have purchased additional mailboxes for CallPilot, enter the keycode you received with
your mailbox package.
If you have not purchased additional mailboxes, leave these boxes empty.
Use these boxes only for the keycode for additional mailboxes. Do not enter the keycode that
enables the basic voicemail application.
From Extension
Enter the extension number of the first telephone in a range of telephones you want to create
a mailbox for.
A mailbox is created for this telephone and for all of the telephones up to the extension
number you enter in the To Extension box.
The mailboxes are named according the set name of the telephone and assigned Class of
Service 1.
To Extension
Enter the extension number of the last telephone in a range of telephones you want to create
a mailbox for.
The extension number you enter in this box must be the same or higher than the extension
number you enter in the From Extension box.
Outdial Method
Select the outdial method you want to assign to the mailboxes created using the From
Extension and To Extension boxes. You can choose None, Line, Pool or Route.
If you select
None
, no outdial method is assigned to the mailboxes.
If you select
Route
, a route is assigned as the Outdial Method for the mailboxes.
Note:
If you have changed any of the IP addresses or the Subnet Mask, you must reboot the
CallPilot Mini before you start programming the CallPilot parameters.
Table 6
Quick Install Wizard parameters for a Avaya CallPilot® Mini
Field name
Description
