Initializing the Avaya CallPilot® Mini
11
Avaya CallPilot® Mini Quick Start Guide
The prompt
To change any of this, press any key within 5 seconds
appears.
7
Press the
Enter
key.
The prompt
(M)odify any of this or (C)ontinue?
appears.
8
Press the
M
key and press the
Enter
key.
The prompt
Do you want a LAN interface?
appears.
9
Press the
Y
key and press the
Enter
key.
The prompt
This board’s LAN IP Address (0.0.0.0 = RARP)
appears.
10
Type the IP address for the Avaya CallPilot® Mini in a valid dotted format and press the
Enter
key.
The prompt
Subnet mask for LAN (0 for none)
appears.
11
Type the Subnet Mask for the Avaya CallPilot® Mini in a valid dotted format and press the
Enter
key.
The prompt
Should there be a default gateway for packet routing?
appears.
12
If the Avaya CallPilot® Mini needs a next hop router, press the
Y
key and press the
Enter
key.
If the Avaya CallPilot® Mini does not need a next hop router, press the
N
key, press the
Enter
key and go to step 15.
The prompt
IP address of default gateway?
appears.
13
Type the IP address of the next hop router in a valid dotted format and press the
Enter
key.
14
Press the
Enter
key until the following prompt appears.
(M)odify any of this or (C)ontinue?
15
Press the
C
key and press the
Enter
key.
16
Connect the LAN cable to the Ethernet port on the Avaya CallPilot® Mini.
You can now initialize the Avaya CallPilot® parameters. For information about how to initialize
the Avaya CallPilot, refer to
“Running the Quick Install Wizard” on page 12
Note:
It will take approximately one minute for this prompt to appear.
Note:
If you do not press a key within 5 seconds of this prompt appearing, repeat
steps 5 and 6.
