manualshive.com logo in svg

Avaya BSGX4e, Руководство по установке

Поделиться
Скачать
Avaya BSGX4e Скачать руководство пользователя страница 26

BSGX4e Business Gateway Installation Guide

26

Release 01.01

NN47928-303

4. To verify the new DNS settings, enter the 

show

 command again:

*ICAD*>

 

show system dns

5. To save the changes to the configuration, enter:

*ICAD*

>

 save

Verifying the WAN connection

To verify that the BSGX4e unit is connected to the network, try a simple ping test. If 
the BSGX4e includes the network information described in 

Initializing the WAN 

connection (page 23)

  (its eth0 IP address, the default gateway address, and a DNS 

server), a ping from the BSGX4e can reach a network location.  An example follows:

„

To ping the network location 

www.yahoo.com

, enter:

ICAD> 

ping www.yahoo.com

„

If the connection is successful, the ping responds with messages similar to the 
following:

Pinging www.yahoo.com (68.142.197.87): 56 data bytes

Reply from 68.142.197.87: bytes=56 icmp_seq=0 time=50ms

Reply from 68.142.197.87: bytes=56 icmp_seq=1 time=50ms

Reply from 68.142.197.87: bytes=56 icmp_seq=2 time=50ms

Reply from 68.142.197.87: bytes=56 icmp_seq=3 time=50ms

----- www.yahoo.com ping statistics -----

4 packets transmitted, 4 packets received, 0.0% packet loss

Round-trip times: min/avg/max=50/50/50ms

„

If the ping to a network location is not successful, ensure that the BSGX4e can 
reach the access router. To do this check, ping the default gateway address. 
To see the default gateway address, look at the default route in the route table 
(

Destination 0.0.0.0

). For example:

ICAD> 

show route table

Destination

    Netmask         Gateway          Interface

-------------------------------------------------------------

0.0.0.0

 

       

0.0.0.0         

66.206.164.193

   eth0

ICAD> 

ping

 66.206.164.193

„

If the ping to the gateway address is successful, it verifies that the BSGX4e is 
well connected to the access router. If the ping to the gateway address is not 
successful, ensure that the address is correct and that the WAN LED is lit.

After you connect the unit to the network, you can remotely configure the unit. For 
information on all configuration options, see the BSGX4e Business Gateway User 
Guide.

Содержание BSGX4e

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды