Avaya BCM450 Rls 6.0 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 100

background image

BCM450 Hardware & Installation

NN40011-001 Issue 1.2 BCM450 Rls 6.0

15

Connect the ports on station modules only to approved digital telephones and
peripherals with the proper cables on a protected internal wiring system.

DANGER: Risk of electric shock

The safety of this product requires connection to an outlet with a third-wire
ground. Use only with the supplied BCM450 power cord and a three-wire
power outlet.

CAUTION: Check ground connection

Ensure that the electrical ground connections of the power utility, telephone
lines, and internal metal water pipe system, if present, are connected. If these
ground connections are not connected, contact the appropriate electrical
inspection authority. Do not try to make the connections yourself.

Caution

: Use only qualified persons to service the BCM system, this includes

the installation and service of this unit. The service personnel must be aware
of the hazards of working with telephony equipment and wiring. They must
have experience in techniques that minimize any danger of shock or
equipment damage

.

CAUTION : Risk of equipment damage

Service personnel must be alert to the possibility of high leakage currents
becoming available on metal system surfaces during power line fault events
near network lines. These leakage currents normally safely flow to protective
earth ground through the power cord.

System shutdown

: You must disconnect the media bay module cables from

the system before you disconnect the power cord from a grounded outlet.

System startup

: You must reconnect the power cords to a grounded outlet

before you reconnect the cables to the media bay modules.

Environment Checklist

The installation area must be:



Minimum of 4 m (13 ft) from equipment such as photocopiers,

electrical

motors

and

other

equipment

that

produces

electromagnetic, radio frequency and electrostatic interference



Within 1.5 m (5 ft.) of a three-wire grounded electrical outlet



Clean, free of traffic and excess dust, dry and well ventilated



Within the temperature ranges of 0°C and 40°C (32°F and 95°F)



Between 20% and 80% non-condensing relative humidity



Enough space and strength to support the BCM base unit



Minimum of 46 cm (18 in.) from the floor

Note

: The installation area must be of sufficient height from the floor to

prevent water damage.

You also need the following equipment to install a BCM450 unit:

«
...
13
14
15
16
17
...
»

Содержание BCM450 Rls 6.0





































































































Отзывы:

Нет отзывов

Похожие инструкции для BCM450 Rls 6.0

Бренд: Panasonic Страницы: 8

Бренд: Panasonic Страницы: 8

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 280

KXTVS100 - VOICE MAIL SYSTEM

Бренд: Panasonic Страницы: 91

Бренд: Panasonic Страницы: 872

Easa-Phone VA-208

Бренд: Panasonic Страницы: 45

Easa-Phone VA-208

Бренд: Panasonic Страницы: 45

Бренд: Panasonic Страницы: 128

Бренд: Panasonic Страницы: 408

Бренд: Samsung Страницы: 2

Бренд: Barracuda Страницы: 3

Бренд: Unify Страницы: 19

Бренд: Panasonic Страницы: 8

Бренд: Panasonic Страницы: 10

Бренд: Panasonic Страницы: 56

Бренд: Panasonic Страницы: 67

Бренд: Radio Shack Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды