Avaya B179 SIP, Руководство по установке и администрированию

Страница: 54 / 90

Avaya B179 SIP Conference Phone Installation and Administration Guide
50
<enable>
<password>
<eap_tls>
<enable>
<password>
<qos>
<dscp_sip>
<dscp_media>
<time>
<ntp>
<timezone>
<daylight_save>
<ntps>
<sip>
<udp_transport> Specify if UDP shall be used as transport.
<udp_port> Specify the UDP port to listen to.
<tcp_transport> Specify if TCP shall be used as transport.
<tcp_port> Specify the TCP port to listen to.
<tls_transport> Specify if TLS shall be used as transport.
<sips_transport> Specify if SIPS shall be used as transport.
<tls_port> Specify the TLS port to listen to.
<rtp_port> Specify the start port for RTP traffic.
<outbound_proxy /> Specify the URL of outbound proxies to visit for all outgoing requests. The
outbound proxies will be used for all accounts and will be used to build the
route set for outgoing requests. The final route set for outgoing requests will
consist of the outbound proxies and the proxy configured in the account.
<use_stun> Use Simple Traversal of UDP through NATs (STUN) for NAT traversal. Default is
no.
<stun_domain /> Specify domain name to be resolved with DNS SRV resolution to get the
address of the STUN servers. Alternatively application may specify stun_host
and stun_relay_host instead.
<stun_host /> Specify STUN server to be used in ”HOST[:PORT]” format. If port is not specified,
default port 3478 will be used.
<use_turn> Use Traversal Using Relay NAT (TURN) for NAT traversal. Default is no.
<turn_host /> Specify TURN relay server to be used.
<turn_tcp> Use TCP connection to TURN server. Default is false.
<turn_user /> TURN username.
<turn_passwd /> TURN password.
<nat_type_in_sdp> Support for adding and parsing NAT type in the SDP to assist troubleshooting.
The valid values are:
0: no information will be added in SDP and parsing is disabled
1: only the NAT type number is added
2: add both NAT type number and name