CTM; Reviewed:
SPOC 11/29/2007
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
14 of 51
AudioCodesMP118.doc
Step
Description
17.
On Page 2, set the
Call Limit
to the number of call appearances set on the station form
in Step 15. Verify that the
Mapping Mode
is set to
both
. This setting allows the OPS
station to both originate and terminate calls.
18.
Repeat Steps 13 -17 for each remaining endpoint located at the branch office. The
branch office has five user endpoints: two analog telephones connected to the MP-118
(x40108 and x40109), two Avaya 4600 Series SIP Telephones (x40101 and x40102),
and a fax machine (x40110). In this configuration, the MP-118 gateway itself must
also be registered as a separate endpoint. For the compliance test, extension 44444 was
created for this purpose with the same characteristics as the Avaya SIP telephones at
this site.
19.
To map a DID number to a station at the main or branch office, use the
change inc-
call-handling-trmt
trunk-group n
command, where
n
is the trunk group number
connected to the PSTN from the Avaya G350 Media Gateway. The compliance test
used trunk group 2 to connect to the PSTN. This trunk group configuration is not
shown in these Application Notes. The example below shows two incoming 11-digit
numbers being deleted and replaced with the extension number of the desired station.
add off-pbx-telephone station-mapping Page 2 of 2
STATIONS WITH OFF-PBX TELEPHONE INTEGRATION
Station
Call Mapping
Calls Bridged
Extension
Limit Mode
Allowed Calls
40108
2 both
all both
change inc-call-handling-trmt trunk-group 2 Page 1 of 3
INCOMING CALL HANDLING TREATMENT
Service/ Called Called Del Insert
Feature Len Number
tie 11 17325551234 11 40104
tie 11 17325551236 11 40108