CTM; Reviewed:
SPOC 11/29/2007
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
13 of 51
AudioCodesMP118.doc
Step
Description
15.
On Page 3, under
BUTTON ASSIGNMENTS
, create the appropriate number of call
appearances for the SIP endpoint being configured. In general, the appropriate number
of call appearances on Avaya Communication Manager is the same as the number of
call appearances supported by the endpoint. To create a call appearance, enter
call-
appr
as the button assignment. The example below shows the configuration of one of
the analog endpoints connected to the MP-118. The analog endpoints used in the
compliance test were all configured with two call appearances.
There are two Feature Name Extensions (FNEs) that require the assignment of feature
buttons in order to operate. The Automatic Callback FNE requires the assignment of an
auto-cback button. The Conference On Answer FNE requires the assignment of a no-
hld-cnf button. Both of these button assignments are shown in the example below.
16.
Map the Avaya Communication Manager extension to the Avaya SES media server
extension defined in Section 4, Step 8 with the
add off-pbx-telephone station-
mapping
command. Enter the values as shown below:
Station Extension
: Avaya Communication Manager extension
Application
:
OPS
Phone Number
: Avaya SES media server extension
Trunk Selection
: The SIP trunk group number
Configuration Set
: Enter a valid configuration set. The compliance test used
configuration set 1 which contained the default values.
add off-pbx-telephone station-mapping Page 1 of 2
STATIONS WITH OFF-PBX TELEPHONE INTEGRATION
Station Application
Dial
Phone Number Trunk Configuration
Extension
Prefix
Selection Set
40108 OPS - 40108 1 1
-
add station 40108 Page 3 of 4
STATION
SITE DATA
Room: Headset? n
Jack: Speaker? n
Cable: Mounting: d
Floor: Cord Length: 0
Building: Set Color:
ABBREVIATED DIALING
List1: List2: List3:
BUTTON ASSIGNMENTS
1:
call-appr
5:
auto-cback
2:
call-appr
6:
no-hld-cnf
3:
7:
4: 8:
