manualshive.com logo in svg

Avaya AP-3, Руководство пользователя, Страница: 3 / 425

Поделиться
Скачать
Avaya AP-3 Скачать руководство пользователя страница 3

Regulatory Information

Regulatory Information

See the 

Regulatory Flyer

 that came with your AP-3 unit or go to the CD-

ROM to view the information.

Warranty

Avaya Inc. provides a limited warranty on this product. Refer to your 
sales agreement to establish the terms of the limited warranty.  In 
addition, Avaya’s standard warranty language as well as information 
regarding support for this product, while under warranty, is available 
through the following website:  

www.avaya.com/support

Notice

While reasonable efforts were made to ensure that the information in this 
book was complete and accurate at the time of printing, Avaya can 
assume no responsibility for any errors. Changes and corrections to the 
information contained in this document may be incorporated into future 
reissues.

Содержание AP-3










































































































































































































































































































































































































































Отзывы:

Нет отзывов