Avaya AP-3 Скачать руководство пользователя страница 269

Страница: 269 / 425

Symptoms and Solutions

7-14 Avaya Wireless AP-3 User’s Guide

What if network traffic is being directed to a nonexistent host?

•

All sessions are disconnected, traffic is lost, and a manual override

is necessary

•

Workaround: you can configure the switch to mimic the nonexistent

host

I have just configured the Management ID and now I can't manage
the AP?

•

Check to ensure your password is correct. If your password is

incorrect or all inbound packets do NOT have the correct tag, then
a manual override is necessary.

CAUTION:

The manual override process disconnects all users and resets all values
to factory defaults.

Active Ethernet (AE)

The AP Does Not Work

1. Verify that you are using a standard UTP Category 5 cable.

2. Try a different port on the same AE hub (remember to move the

input port accordingly) – if it works, there is probably a faulty port or
bad RJ-45 port connection.

3. If possible, try to connect the AP to a different AE hub.

Содержание AP-3










































































































































































































































































































































































































































Результаты поиска

Содержание AP-3

Отзывы:

Avaya AP-3, Руководство пользователя, Страница: 269 / 425

Результаты поиска

Содержание AP-3

Отзывы: