3616/26 Wireless IP Telephone
Installation and Configuration Guide
555-301-107, Issue 3
19
May 2004
License Management
License Management lets you select the VoIP protocol that your site is licensed to download and run.
The CCMS Protocol to use for the 3616/26 Wireless Telephones is
009
. Any other protocol will cause
the Wireless Telephone to malfunction.
1.
Press
0
to view the current selection. The protocol number appears on the display.
2.
Press
0
to change the protocol.
3.
Press the right arrow to scroll through the options.
4.
Press
0
to select the displayed protocol number.
After selecting the correct protocol for your site, you should upgrade the software for the phones. See
Upgrading Wireless Telephones
section for more information.
Restore Defaults
The Restore Defaults option will set all user and administrative parameters to their factory defaults.
During configuration, press Right Arrow to skip this mode.
Site Survey Mode
Site Survey Mode is used to check the signal strength from access points. When you select Site
Survey Mode, the Wireless Telephone will remain in this mode until it is powered off. During
configuration, press Right Arrow to skip this mode. See Certifying the 3616/26 Wireless IP Telephone
(Section 7) for more information on this mode.
Regulatory Domain
The Regulatory Domain will default to North America on the Wireless Telephone display. FCC
requirements dictate that the menu for changing the domain be available by password, which in our
case is the
LINE
button. To change the domain, press
LINE
and then enter the digits that represent the
site’s domain. Note that both digits must be entered.
01
- North America
02
- Europe (except Spain and France)
03
- Japan
04
- Spain
05
– France
Note: as of this writing, Spain and France are adopting the general European Regulatory rules. Check
with your wireless LAN administrator or supplier for which domain to enter in these countries.
