Avari Fitness Recumbent Bike A150-210, Руководство пользователя

Страница: 12 / 23

Place the AVARI® Recumbent Bike in the area where it will be used. It is recommended that the
AVARI® Recumbent Bike be placed on an equipment mat. The AVARI® Recumbent Bike is
approximately 49.6 inches long x 24 inches wide x 39.4 inches tall. (These dimensions may vary up to
one inch.) An area 4 feet wide x 6.5 feet long is required for safe operation of the
AVARI® Recumbent
Bike. Make sure that adequate space is available for access to and passage around the AVARI®
Recumbent Bike.
LEVELING:
Adjust the LEVELING CAPS(18) on the REAR STABILIZER(4) so the recumbent bike sits
on the floor without rocking. Remove and reposition the
LEVELING CAPS(18)
on the
REAR
STABILIZER(4) to level the AVARI® Recumbent Bike. Adjust the STAND(70) under the
MAIN FRAME(1) to get more support for the base of the AVARI® Recumbent Bike.
MOVING: The AVARI® Recumbent Bike must be lifted to be moved. Two people are required to
grasp the HANDLEBAR(10) and the REAR STABILIZER(4), lift and move.
FUNCTION INSPECTION:
Visually inspect the AVARI® Recumbent Bike to verify that assembly is as shown in the above
illustration. Check the function of the AVARI® Recumbent Bike by turning the crank slowly through one
complete revolution to verify that the drive train functions properly. Adjust the TENSION KNOB(8) and
verify that it functions properly.
CAUTION: Locate and read the WARNING LABEL(75) on the AVARI® Recumbent Bike. Make sure
that all users read the WARNING LABEL(75) before using the product.
SET UP INSTRUCTIONS
12
Equipment Mat
(not included)
Adjust the STAND(70) until it
contacts the floor.