background image

COMPUTER INSTRUCTIONS

22

D.  HEART RATE CONTROL PROGRAMS (Program H.R.C.)

STEP 3: SET THE PROGRAM TIME, DISTANCE

, CALORIES,

 and 

TARGET HEART RATE

When you select one of the percentage, 55%, 75%, or 90%, the computer will calculate the Target Heart 

Rate for the workout based on the age and percentage of Maximum Heart Rate that you input. And the 

computer will go through the input items as follows and allow you to set the function values. Use the                             

UP/DOWN

 dial and 

ENTER

 button to input the values. Or press the 

ENTER

 button to pass some of the inputs.

STEP 4 : START TO WORKOUT

Press the 

START/STOP

 button to start to workout. Always hold the Pulse Sensors on the Handlebars with 

both hands.

STEP 1:  POWER ON

Pedaling or press any button.

Target Heart Rate

 (30 to 230)

 

 Time (1:00 to 99:00)   Distance (0.1 to 99.9 mile)   Calories (10 to 990 cal)

When you select the TARGET HEART RATE program, “

TAG”

, input the function value as following:

Time (1:00 to 99:00) 

 Distance (0.1 to 99.9 mile) 

 Calories (10 to 990 cal)

E.  TARGET WATT CONTROL PROGRAM  (“WATT”)

STEP 1:  POWER ON

Pedaling or press any button.

STEP 4 : START TO WORKOUT

Now you are ready to begin exercising. The program will not start until you press the 

START

 

/

 

STOP

 

button.

Target Watt (10 to 350 watt) 

 Time (1:00 to 99:00) 

 Distance (0.1 to 99.9 mile)

 Calories (10 to 990 cal) 

 Limit Heart Rate (30 to 230)

NOTE: 

When the 

LIMIT HEART RATE

 is preset, if your pulse is equal to or greater than the 

LIMIT HEART 

RATE

 during workout, the computer will remind you with an audible alarm. 

Please note that this 

is a warning for you to slow down or lower the level of resistance.

STEP 2 : SELECT PROGRAM

Use the 

UP/DOWN

 dial and 

ENTER

 button to select the program 

“WATT”

 (Target Watt Control Program).

STEP 3: SET THE PROGRAM WATT, TIME, DISTANCE

, CALORIES,

 and 

LIMIT HEART RATE

After pressing the 

ENTER

 button, the computer will go through the input items as follows and allow you to 

set the function values. Use the 

UP/DOWN

 dial and 

ENTER

 button to input the values. Or press the 

ENTER

 

button to pass some of the inputs.

STEP 2 : SELECT PROGRAM

Use the 

UP/DOWN

 dial and 

ENTER

 button to select the program 

“H.R.C.”

 (Heart Rate Control Programs). 

After pressing the 

ENTER

 button, input your age, from 1 to 99 (if your age was previously entered, the 

computer will display a flashing age).

 Then you can select one of the Heart Rate Control Programs, 55%, 

75%, 90%, and TAG (TARGET HEART RATE).

Содержание A550-705



































Отзывы: