Avanti CK30-1, Инструкция по эксплуатации

Страница: 8 / 32

8
Refrigerator Section
•
2 wire shelves
•
1 crisper with glass lid
•
Instruction Manual
INSTALLATION INSTRUCTIONS
¾
Before Using Your Compact kitchen
•
Remove the exterior and interior packing.
•
Check to be sure you have all of the following parts:
Kitchen Section
•
2 Wire Shelves
•
Faucet Set
•
Strainer
•
Strainer Plug
•
Backsplash and Assembly Screws (Only for model CK30-1)
•
Instruction Manual
•
Before connecting the refrigerator of your Compact Kitchen to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system of the refrigerator from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
¾
Energy Saving Tips
•
The Compact kitchen should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.
¾
Installation of Your Compact Kitchen
NOTE:
1. In order to remove crisper and/or shelves of refrigerator, a clearance A of
10 inches is required. When built-in, no clearance is required on either side.
2. B = 30 inches minimum clearance between the top of the cooking surface
and the bottom of an unprotected wood or metal cabinet.
Figure No. 1